Jetstream Chronicles: Bahia Solano to Tocumen

As you can see from my virtual hangar, I have a British Aerospace Jetstream 41 (ICAO: JS41) turboprop made by PMDG.It cost me dearly but have mostly stayed in the hangar except for some test flights. I read the Pilot Tutorial (93 pages) and the other docs, countless Tips & FAQS but attempts to use it nearly always terminated in one or two engine fires right at the apron. Mostly after I pressed the engine start buttons and if not right at the moment I tried to begin taxi. Quite frustrating if you spend nearly an hour going through checklists in a virtual cockpit (not as comfortable as a real cockpit). But despite the fact that PMDG wasn’t interested in producing a service pack to solve the cockpit state issues, it remains an add-on of very good craftmanship (except for the woes). So, rather than wasting my time running the checklists to end in engine fire I have opted to use this a/c with engines started and program the FMC and set the instruments.

So, today we will fly from Bahía Solano to Panama. I tried this many months ago with the JS41, the first time the engines melted down at the apron. The second time I was 80% into the flight and started descent and had troubles descending and slowing down (something you can’t do at the same time in this a/c) so it overstressed and it was game over, for that see my post “Virtual Incidents & Accidents: Jetstream 4100”. The Jetstream stayed in the hangar since then in 2010… Until now!

Here is our flight plan made with the excellent Plan-G planner. It will be an IFR flight in the Jetstream 4100 from Bahía Solano to Tocumen Intl. airport in Panama. Initial altitude will be 6,000 feet, then when approaching the border with Panama we would temporarily climb to 7,000 feet. Flight Plan is as follows:

SKBS BHS dct DAKMO/A070 a317 ITAGO a317 TBG MPTO

Departure – Bahía Solano

We will be departing (engines started) from Parking #2 of the José Celestino Mutis (ICAO: SKBS, IATA: BSC) regional airport at Bahía Solano in the province of Chocó, Colombia. [runway picture. Twin Otter real life landing at BSC). The stock FSX airport is just crappy so based on aereal recoinassance I made a quick & dirty reproduction. The airport is at 81 feet but in FSX with the mesh it appeared at over 400 feet. The best I could do was move it slightly and accommodate it at 4 feet. However just like the real airport, it is surrounded by a lot of vegetation and hills.

The FMC has been programmed already, Tuned both NAV1 and NAV2 active frequencies to the Ambalema VOR/DME (ABL: 112.70) with OBS 317. It is way back near Bogota with a range of 200nm so I used it to get the initial intercept towards DAKMO but the signal will vanish prior to getting there. The heading bug is set to 343. NAV1 standby frequency set to La Palma VOR (PML 113.10) and the ADF tuned to the Bahia Solano NDB(BHS 244.0 kHz).

So, at about 05:45 AM (UTC-5) after configuring the PMDG Jetstream for take off configuration. V1 and Vr are 103 knots, V2 110 knots, Flaps 9, set torque to 100%, turned off taxi lights, all others on, Ground Spoilers armed.

Slowly pushed the Condition lever out of Taxi to 100% (flight), let it stabilize a bit and then slowly pushed the throttles forward let it build up a bit, brakes relased, the aircraft started to move slowly and you wonder whether you are going to clear the end of the runway. It continues, 70 knots callout, speed picks up and I am near the last quarter of the runway (35), V1 and Vrotate callouts.

I gently pulled the yoke maintaining the a/c on a steady climb following runway heading. Cleared the tree and small hill at the end of the runway. Positive rate of climb callout, gear up… 700 feet AGL retracted flaps to clean configuration. We have the 1965 ft. Cerro Mutis on our left.

The a/c flew above the town of Bahia Solano and into the bay of the same name and Point St. Francisco Solano to our left. Past the Bay of Nabugá and Gulf of Cupica on our right as we head inland to intercept the ABL radial. Then at 200nm outbound ABL the signal goes out as expected.

By now I am at our initial cruise altitude of 6,000 feet continuing heading 347 towards DAKMO. DAKMO intersection is right on the border of the Colombian and Panamanian airspace over the mountains of Darien province, as we neared I climbed further up to 7,000 feet.

Cruise
Jetstream 4100 at 7,000 feet over the mountains of Darien. Passed DAKMO intersection but continuing on the same heading. Now I have the PML VOR on NAV1 & NAV2 with Taboga VOR/DME (TBG 110.00) on standby and the Taboga NDB on the ADF. Unfortunately PML has no DME. I set the OBS1 to PML R-239 to mark our arrival to the ITAGO intersection on this heading (311). Once cleared the mountains I decended to 6,000 feet again.

Passed ITAGO above the Gulf of Panama, the beautiful Pearls Archipel is ahead with the big San Miguel island coming soon in sight. Started planning for the approach which is very tricky with this aircraft. First reduced the speed to around 190 knots, reduced torque to start a descent to 5,000 feet. I reprogrammed the Jetstream’s four speedbugs to 123, 108, 110 and 125 knots respectively for about 20,000 lbs of weight at landing. The last speed being that for Flaps 25.

Arrival
Just prior to reaching ITAGO I had swapped NAV frequencies so that I had TBG on the active and could track the inbound radial (R-311).

A few nautical miles prior to reaching TBG turned right, swapping frequencies yet again so that now I had TBG on NAV1 standby and on NAV2 active and on NAV1 active I had the Tocumen (ICAO: MPTO, IATA: PTY) Runway 03L ILS (INAT 110.70). Here with a beautiful view of Panama city, the Pacific Ocean entrance to the Panama Canal and the equally beautiful Amador Causeway with its three islands (Naos, Perico & Flamenco). My interactive Weight & Balance sheet is now tucked in. Currently at 3,500 feet and intercepting the ILS with OBS set to 030 degrees (pressed V/L on the autopilot and set 030 on the CRS to set intercept heading on the Jetstream). RPM set to 99%, APR armed

It was still early morning and as I approached MPTO there was a low cloud cover making it impossible to visualize the airport, anyway there is the HIS where I was already aligned. At this moment I disabled the altitude hold on the autopilot, enabled the Approach mode and I could see how the a/c maintained horizontal alignment. The EHSI showed it was right on the glideslope, descending gently, still no runway in sight, all is white on the windshield.

The time passes, still nothing in sight just whiteness… kept on monitoring the instruments, aligned to ILS, still right on the glideslope. Suddenly just underneath the blanket of mist I could see the treetops of the mangroves near Tocumen. I was coming at 180 knots, couldn’t make the target of 170 knots. I judged better not to use flaps because Flaps 9 would cause this a/c to either balloon or try to stay afloat above the runway.

More hidden treetops and then some point slightly above Decision Height and suddenly there it was, God gracious! Runway 03R. Disengaged the autopilot and continued the final approach visually.

Landed on the sweet spot, a little flare and then when fully landed reverse thrust to slow down the beast. Spoilers deployed (automatic), applied brakes. When it slowed down to 70 knots I disengaged reverse thrust to taxi out of the runway.

The problem is, apparently with the throttle when you notch it out of reverse (there is a detent) the simulator tends to interpret it as thrust applied and there it goes again. I had to vacate the runway via taxiway F at the end of 03R.

Here a nice misty screenshot from the cockpit as I neared the Tocumen passenger terminal (scenery by Tropical Sim).

And finally I arrived to the gates and went through the shutdown checklist. Didn’t check how much fuel it consumed though… But no aircraft was lost in this operation

The Jetstream 41 from PMDG is a pleasure to fly, it is a bit of a medium maintenance a/c during the whole flight, especially if you get icing conditions or engine overheat which must be monitored closely.

Simulation Events
As I mentioned this PMDG is highly demanding with resources as well. This time I was just crossing ITAGO when I clicked on the instrument panel and the simulation crashed (I get that most often with this PMDG). I had to start all over, but rather than redoing it, I took off from SKBS, took the a/c to cruise altitude then slewed it to the geographical position where the simulation had crashed and continued thereon.

I have a realtively power PC with 4GB so I am considering getting a full 6GB or 8GB (I had 6GB but the memories got damaged due to spikes).

Panama Air Rally 2013: Colon to Rio Hato

Today we will do the 9th leg of the Virtual Pilot Association’s Panama Air Rally 2013 leg #10.
Our flight plan has as departure airport the city of Colón and as arrival the Rio Hato airport. Upon departure we will do a 7nm DME arc procedure during climb prior to heading to the coast. The plan was filed as YFR, that is starting IFR at Colón with a cruise altitude of 4,000 feet (westward) and then at DAMAX we change to VFR rules at 2,500 feet. I will be using FSX as usual and remember, whatever is described here is not meant for real life navigation!

The Aircraft
As I have done in most of this tour, I will be “flying” the very nice Piper Seneca II (PA34-200T). It is an excellent product by Carenado I will review on this blog later on.
We will be cruising at about 120 knots at 4,000 feet with this beautiful twin propeller aircraft. The flight plan estimates a fuel usage of about 12 gallons but I will load it with 50 gallons.
Yet again this flight has been tailored to practice some IFR procedures, while the a/c has a Garmin GPS I will be “flying” it by instruments.

Departure – Colon airport
We will depart from the Enrique Jimenez airport (ICAO: MPEJ) in the city of Colón, province of Colón - Panama Vibes in Panama. The scenery is an alpha version of Lord of Wings Flight Simulation’s MPEJ crudely based on the original airport. In real life it is being fully renovated with a new terminal building and runway suitable for a 767 aircraft.


After going through all the Piper Seneca pre-take off checklists we taxied to runway 36 with lateral winds. Take off took place at around 12:24 local time (UTC-5).

From the picture on the left you can see the Seneca II climbing while beginning to intercept France Field (FNC 109.00 MHz) outbound R-126 for 7 nm. After take off checklist was completed and began adjusting the aircraft for cruise, this required tuning the mixture and setting the propeller RPM according to the checklist.

NAV1 tuned to FNC active and TBG (110.00 MHz) standby, NAV2 with TBG active. The heading bug was set to runway heading (360 degrees) and OBS1 to 126 degrees so that we could easily start intercepting R-126.

Cruise

The screenshot on the right shows the aircraft as I was doing the 7 nm DME arc around the FNC VOR/DME. The arc started at outbound R-126 and ended at R-191. For this I monitored the DME to maintain the 7 nm as much as my dexterities allowed and periodically adjusted the OBS1 at intervals of 10 degrees starting at 126 in order to do the DME arc. At the end of the arc we would be again above the Gatun lake.


Now as we completed the DME arc at 12:50 we have our instruments set to start heading out on FNC R-191 towards MULPO intersection. MULPO is 15.7 nm outbound FNC.

Have got to love this Piper Seneca for IFR, it’s just a pity the large engine cowls obstruct much of the side views.
Reached MULPO at 12:56 local time. In this leg I set OBS2 to Taboga R-259 since I had tuned TBG VOR/DME on NAV2.

Well our next leg on the same course is NEMER intersection 27nm outbound FNC R-191 but it is also intersected by TBG T-259. That means that when I saw the CDI of VOR2 aligning, I was reaching NEMER. I should have been some 32nm from Taboga but I was slightly off course to the west.


Skies are clear and there is no turbulence, what a beautiful day though for simulation purposes a bit of thunderstorms would have been nice. Now we are heading 153 without any VOR to help us to/from. The only help here is that I had the ADF tuned to TBG (311.00 KHz).

Well actually we were now heading towards DAMAX intersection above the Chame gulf near Punta Chame. In preparation for the turn I set OBS1 to 236 degrees as NAV1 was already with TBG active.

And the moment came, at 13:14 reached DAMAX intersection which is 15 nm outbound TBG, it marks the beginning of Victor airway V19 (FSX). At this point I turned right heading 236 (already in OBS1) and descended to 2,500 feet because my flight plan was filed as switching to VFR at this waypoint. [Editor's Note] It is actually recommended (see comments) to climb to at least 4,500 feet due to the proximity of two high hills/mountains. FSX default mesh is very poor at depicting Panama's elevation profile and even though I use an improved mesh (freeware), it seems to lack some. The actual leg from DAMAX flies above Chame Hill which Google Earth reports with around 1,600 feet.

A few miles past DAMAX we overflew the Chame airport, this time with an update from Lord of Wings Flight Simulation as well.
Chame airport is located in the province of Panama - Panama Vibes, the 2nd province we overfly in this flight. The stock airport in FSX is very disappointing, this update makes it a bit more like the real thing but not quite because the Panamanian police does not allow to take pictures of the airport buildings even though the law says that such prohibitions should not take place unless there is a law that says that, but well, that is Panama.


After DAMAX we continue tracking TBG outbound R-237 towards UKATI intersection, again we reach UKATI by tracking the TBG radial and monitoring the DME.
Also remember, UKATI intersection is just off the side of the Rio Hato airport, our destination.

Approach

All right then! the weather is good and visibility is excellent. There are no navigation aids at Rio Hato (MPRH) in the province of Cocle - Panama Vibes, Panama. We overflew the airport in a crosswind leg and the screenshot shows the Piper on the downwind leg with the Rio Hato airport. Yet again a better rendition in Panama Lite X based on the airport’s glory times by Lord of Wings Flight Simulation. Here you can also appreciate the rocky island just off Rio Hato which serves as a good reference point for our visual approach.

Currently this airport is also undergoing a complete renovation. It will finally have a passenger terminal building, a runway as long as the original for international flights and the Panamerican Highway will go underneath in a tunnel rather than crossing the runway right through its midpoint. It is not known (everything is secret in Panama) whether there will be navigation aids added to this airport.
After the downwind leg I set the heading bug to 90 degrees for the base leg and turned in that direction keeping an eye on the altitude and the visual references. The approach checklist was completed and as I turned into the final leg the aircraft was in landing configuration.

The virtual aircraft was landed safely on Rio Hato’s runway 36 and proceeded to the apron and then close the flight plan. This was flown online on the IVAO network but unfortunately (and almost as usual) there was no live virtual ATC coverage anywhere in this airspace. I guess next time I will just use the FSX crippled ATC.
After the a/c was on blocks the shutdown checklist was completed, the Carenado checklists have a few omissions. The a/c was again in its cold & dark configuration ready for the next flight. We used up 11 gallons of fuel against the estimated 12 gallons.

You can also watch the video of the approach to Rio Hato (base leg onwards) on You Tube.

If you are a flight simulation enthusiast using FS9, FSX, Flight Gear or X-Plane and you like to “fly” in Panamanian virtual airspace, we invite you to join our (closed) group on Facebook called “Aviacion Virtual en Panama”. But do remember that conversations are on topic only! Add-on scenery (in progress) by Lord of Wings Flight Simulation’s Panama Lite X.

Panama Air Rally leg #4: Albrook to Pedasí

It is time for another exciting VFR trip with IFR practice in the virtual airspace of the Republic of Panama! As usual we will be using the Microsoft Flight Simulator X. This article describes the 4th leg of the Panama Air Rally of the Virtual Pilots Association.

Flight Brief

Our flight will be a total of 116nm departing from Marcos A. Gelabert (MPMG/PAC) in Albrook, Panama city, Panama to the old Pedasí airport (MP00 in FSX) in Los Santos, Panama. We will cruise at 6,500 feet. We loaded 60 gallons of fuel but expect to spend 18 gallons.

We will be using our trusted Piper Seneca II (Carenado) with custom livery. Here in this photo we the airport terminal and the Panama Ports’s cranes in the background.

Departure
Now we are at the holding point of runway 18 at MPMG and awaiting permission to enter the runway. We are setup for departure with VOR 1 tuned to the Taboga VOR/DME (TBG 110.00), the ADF to the Taboga NDB (311.00), OBS 1 to 183 and the heading bug to 235 the course of the next leg. Here with the Panamanian flag waving proudly at the top of Ancon Hill with Albrook Mall in the background. Albrook airport and Panama city scenery courtesy of Victor Brumley.

We are airborne, winds 330 degrees 09 knots. As we climb keeping runway heading we see the Panama Canal Administration building on our left at the base of Ancon Hill.

We continue climbing past the hill on our right next to Panama Ports. Flaps up, Cowl flaps open.

OK, we have cleared the hills and we turn left R-183 inbound Taboga (TBG). Still enjoying the scenery of the beautiful but chaotic city with the Bridge of the Americans and the Miraflores Locks of the Panama Canal in the background.

We continue climbing and we should soon be crossing the Taboga VOR (11nm) atop the island of the same name.

En Route
We have crossed Taboga VOR/DME (did you see the instrument?) and we turned right tracking Taboga outbound R-235. This leg will be 15.1nm to the DAMAX intersection.

In the meantime here in the vicinity of Taboga we can see the Howard airport (MPHO) nowadays renamed Panama Pacífico (MPPA). We still keep the ADF and VOR 1 on TBG VOR/DME.

Now we are approaching DAMAX intersection which should be near the base -but over water- of that tip of land called Punta Chame. At that tip there used to be a short dirt landing strip which is closed nowadays.

We passed DAMAX at 6,500 feet and went over the Chame mountain and here we see the Chame airstrip (MP24) below the starboard engine. Here a somewhat enhanced version based on real life from the Panama Lite X preview.

On this leg we keep cruising outbound TBG R-237 for 25.7nm towards UKATI intersection.

At this point we are right at UKATI intersection with the Rio Hato airport (MPRH) in sight. Here showing the Panama Lite X version of the airport.

This airport has always had the Panamerican highway cutting it in half (no tunnel!). Nowadays it is being totally renovated with a tunnel, new runway and a passenger terminal to become the newest international airport in Panama. Past UKATI we turn left heading 218 for 29.7nm. Time to tune the Chitre NDB (CHE 440.00) on the ADF.  To help us finding the CHE NDB on the Chitre airfield (MPCE) we tune VOR 2 to the Santiago VOR DME (STG 114.50) and OBS 2 to R-104, the CDI should also center above Chitre if we use TBG R-229.

This is perhaps the longest leg of the trip, we are now flying above the Gulf of Parita with the town of Pocrí and Aguadulce on the far right.

Since we departed late in the afternoon we can observe that the sun is beginning to hide on the horizon. This trip should take us between 50 –60 minutes, enough to arrive with daylight.

Okay we went straight to the CHE NDB  and saw both CDI needles center as we approached Chitre airport shown on this picture at 5 o’clock.

Here we are depicting Panama Lite X’s version of Chitre airfield which updates the default FSX airport to current day state.

We passed Chitre at 3,500 feet and turned left heading 137 degrees (use the heading bug) with CHE NDB directly behind us.

This is actually the longest and final leg of the trip with 34.4nm. We should pass several major rivers. Here one of them with the Guararé airfield in sight (Panama Lite X version). In older Microsoft simulators it was MPNU but in FSX it has a different code. This Panama Lite X version updates the Guararé airfield complete with terminal building and surrounding areas.

Further along this last leg we see the mouth of Mensabe river with the La Candelaria dirt airstrip following it prior to the mouth of the Pocri river. All VFR reference points added by Panama Lite X.

La Candelaria airstrip is not found in the default simulator. About a year ago the airstrip was closed but as it goes with airfields in Panama, it may be opened (and closed) as time passes.

Arrival
After we passed Mensabe river, La Candelaria and Pocri river we find ourselves in the vicinity of Pedasi, but first we have to also pass the mouth of the Purio river.

We continue descending, here with the old Pedasi runway in sight at 1,200 feet. Again, this is Panama Lite X depiction of the Pedasi airport. A new airfield with a longer airstrip has been built 1.8nm south west of the old airport because the land had been bought by a foreign real estate developer and because winds were a bit too strong in the area.

Finally we arrived safely to Pedasí (MP00) just before the sun went over the horizon as there are no airport lights.

We used 13 gallons of fuel against the expected 18 gallons with a cruise fuel flow of 6.9 gal/hr. Our Carenado Piper Seneca II proved again to be a wonderful aircraft for practicing IFR navigation. I suppose you have noticed how I hinted the settings of the navigation instruments for a reason but in any case it is left for the reader to grab an interactive chart and verify the information.

Last, remember that this is NOT for real life navigation. I hope you enjoyed our long trip over the Panamanian skies. If you are interested in Panamanian virtual aviation or being up to date in the happenings of the virtual skies of Panama (flight simulation) visit our Facebook group “Aviacion Virtual en Panama” were you can find freeware scenery and references to payware scenery, anything related exclusively to our virtual skies. May the ILS be with you!.

Night Flight: Chame to Panama city

Today I performed two flights on the Cessna 172 in the livery of MAG Flight Training. This 2nd flight was an IFR practice under night conditions.

My flight plan is shown on the left map. The departure airport was Chame airfield in the town of Chame, province of Panama. Departure time was 18:38 (UTC-5) with just enough light to see the runway. Our runway is at 141 ft of altitude but there are a few mountains in the vicinity.

From Chame I would fly heading 028 degrees towards DABEL intersection (direct) climbing to 3,500 feet. There are some mountains in the area of Lidice near DABEL so we have to make sure to have reached cruise altitude. Do note however, this is flight simulation so the terrain mesh may not be accurate!.

In the darkness I climbed to cruise altitude with the lights of the towns and the Panamerican highway below. Prior to departure I had set the Heading bug to my initial course 028 after performing a turn because I took off from Chame runway 18. Our first leg to DABEL would be around 11 nm.

I had also tuned the NAV1 and NAV2 radios to the Taboga VOR and COM1 to Panama Approach. The OBS1 I set to R-083 in preparation to that turn and OBS2 to 007 degrees. Having flown a straight line heading 028 I would have reached the DABEL intersection when the DME showed 15nm west of Taboga and also because my CDI on VOR1 would indicate I was about to intercept the TBG R-083. At that point I turned right and went straight to Taboga VOR heading into the sea and total darkness. Our next queue would be the VOR1 To/From indicator as well as the DME as this leg would be 15nm.

A few nautical miles from Taboga I initiated a descent o 2,500 feet always keeping an eye on the artificial horizon as to not to disorient myself. Obviously looking outside as well .

Just before reaching Taboga I turned left to fly the Taboga outbound radial 007 towards Marcos A. Gelabert. The initial approach fix being about 5nm from the airport This picture here shows the little dot of the airport approach lights and on our left the Bridge of the Americas. Well, not much can be seen, it was dark.

On our approach further descent was required in order to safely arrive to the airport. The Panama Pacifico (Howard airport) was on the left but on this snapshot you could see the Bridge of The Americas as our virtual Cessna made the approach in between Ancon Hill on the right an the other hill on the left.

In this final approach I maintained about 70 knots approach speed with flaps. Landing was done softly on Marcos A. Gelabert runway 36 with scenery from Victor Brumley who has done an excellent job (work in progress). Then I taxied to the ramp and ended the flight.

This small picture shows the flight analysis done by FSX, the blue line in the middle represents the Taboga (TBG) VOR. It was fun though not much scenery could be appreciated, nothing like practicing some IFR skills even though I am not a (real life) pilot . As always fly safe in the virtual skies and above all do not use this information for real flight planning!.

Testing scenery for Panama (San Blas X)

I am testing scenery of Panama for FSX made by Lord of Wings Flight Simulation. This is in fact pretty exciting though it is repetitive work but well, it helps sharpening virtual flying skills.

Panama is a country that has long been neglected in Microsoft Flight Simulator by both the scenery makers (freeware) and the payware scenery makers, that is until Lord of Wings Flight Simulation.

They have several parts in progress all under the name “Panama Lite X” and by “lite” they mean you must not expect scenery like ORBX and the like where they have volumetric grass and stuff like that. I myself find that an overkill, you are there to fly either VFR or IFR not to do plane spotting. The Panama Lite X scenery is lightweight:

• Corrects coastlines
• Uses a better elevation mesh
• Corrects the vegetation. If you want to correct the vegetation on parts of Panama not covered by Panama Lite X, I can recommend the XClass South America landclass add-on (payware).
• Corrects navaids such as NDBs, VORs and VOR/DMEs.
• Adds visual queues such as river mouths and others that are useful for VFR and are totally missing in the default scenery.
• Whenever possible even the airport terminal is modelled in 3D.
• Corrects regional airfields of Panama (other than MPHO, MPMG and MPTO) that are present in FSX.
• Adds a lot of regional airfields that exist in real life but are not present in FSX. This adds a lot of exciting short-runway airfields as well as several (short) island airfields.

The Azuero X component is nearly finished and you can see some videos of it at the Lord of Wings Flight Simulation You Tube channel. As for myself I am currently testing the San Blas X add-on component of Panama Lite X. It has the following airports under test (more to be added):

• Puerto Obaldia
• Carti
• El Porvenir
• Rio Sidra
• Playón Chico

This of course as time permits because LoW FS is a one-man team. I am pretty sure when it becomes available many people will be excited even if it is not a high-end detail scenery like ORBX.

Jaqué to Guararé (Panama) in a Beech King Air 350

Ladies & Gents, today we are going to do another IFR practice in FSX, this time during the late hours of the afternoon. I will use my beloved Beechcraft King Air 350 with my call sign and add-on scenery courtesy of Lord of Wings Flight Simulation.
We will depart from Jaqué airfield in the province of Darién, Panama with a runway 800 meters long. Departure time will be 17:22 with 538 gallons of fuel for an estimated travel time of 00:40 minutes.
Cruise altitude will be 12,000 ft and our destination will be Guararé airfield in Los Santos. We will be flying over the water all the time. We will make use of the on-board instruments for our IFR navigation. The flight plan is shown on the figure on your upper left.

Departure from Jaqué

Jaqué (ICAO: MPJE, IATA: JQE) is a small airfield in Darien, flown only by private aircraft and one commercial airline (Air Panama). I will be using add-on scenery by Lord of Wings Flight Simulation which is under development, unlike the horrendous FSX default this airport is updated and contains the VFR references not found on the stock FSX.
   As a preparation I tuned NAV1 to Taboga (TBG 110.00) VOR-DME and set OBS to 309º. Also tuned NAV2 to La Palma VOR (PML 113.10) and the ADF to Taboga NDB (TBG 311.00). Prepared (but not armed) the autopilot to the cruise altitude of 12,000 feet.

  Departure was from runway 13 with little winds and scattered clouds around 8,000 ft. Upon take-off I turned right to intercept R-309 inbound TBG. Jaqué is 113 nm from Taboga. On this radial we are going to fly on airway V20 towards BOMAK intersection which is about 51 nm from Taboga, do the math, our first leg is 62 nm.

On our initial climb and less than 5 nm northwest of Jaque airfield is the Bahía Piñas (BFQ) airfield and the nearby Tropic Star Lodge. These are not in the stock FSX and the coastline doesn’t even resemble it, but the add-on scenery greatly improves this. At this point we make sure our heading bug is set to 258º for our next leg (BOMAK-MP20)

Climb & Cruise

We continue our climb to FL120 and maintaining our course inbound to Taboga towards BOMAK, we maintain the CDI centered and enjoy the nature of Darien on our right and the Gulf of Panama underneath us. Turned off the autofeather when reached cruise altitude.
We watch the DME coupled to NAV1 (TGB), while being centered on the radial we should be at BOMAK when the DME marks 51nm. BOMAK is less than a mile west of Punta Cocos (MP26) airfield on Isla del Rey which you should see with good visibility. A couple of miles prior to BOMAK we turn left heading 258º (remeber we set our heading bug?). At this point we should be flying on R-258 outbound La Palma VOR (PML 113.10) so we now set NAV1 to PML, our OBS to 258 as well and NAV2 to TBG. Because PML is no DME, we set the DME instrument to NAV2 (TBG) we will need that as a reference in case of low visibility.

Since the TBG VOR is tuned on NAV2 we an now set the ADF to the Chitre NDB which should be slightly to our front right. It doesn’t have much power so it won’t be alive until we are near the coast of the Azuero peninsula. I am cruising slightly above 200 KIAS. On Approach with good visibility we should see on the far left (11 o’clock) Iguana Island near Pedasí (airfield) and the Mensabe river, Then Pocri river and then ahead of us Guararé river.

Arrival to Guararé

Remember we have the DME tracking on NAV2 (TBG)? well, on this course the CHE NDB should become alive when the DME marks about 45 nm. It points to Chitre airport (MPCE) our alternate airport, it also has lights.

When the DME marks about 54nm from TBG (roughly some 30 minutes into our virtual flight) I initiated the descent from 12,000 to 3,500 or even 3,000. Turned on the landing lights when passing 10,000 ft., armed the autofeather. Since I was going to land on runway 16 I set the heading bug to the runway heading, turn right slightly for the base leg and when appropriate turn left for finals. We will have the mouth of Guararé river on short final.
Our virtual flight arrived to Guararé without inconveniences in about 40 minutes flight time and ended up with 452 gallons, so my virtual King Air 350 used up 86 gallons of fuel. The plane was on blocks at 17:56 local time enjoying the add-on scenery courtesy of Lord of Wings Flight Simulation which replaces the horrendous (and terribly simplistic) stock FSX airport.
  If you want to see the video summary of this flight you can watch it on You Tube.